How to Frame and Display Your Dead by Daylight Art Print

Quick answer

Measure your print first, then choose a frame with an acid-free mat that gives at least 2 inches of breathing room on each side. Keep it out of direct sunlight, hang it at eye level, and consider a lenticular or textured piece as a no-frame display if you want a quicker setup.

You have a Dead by Daylight art print and a blank wall. The difference between a print that looks like an afterthought and one that looks like a centerpiece comes down to a few decisions: how you measure, what you put between the art and the glass, and where you hang it.

This guide walks through the process in order, with the common mistakes that ruin prints and the checkpoints that tell you you're on track. It also covers when framing is optional, especially for pieces that already have their own physical presence.

Step 1: Measure the print and decide on a mat

Lay the print flat and measure the exact image and paper dimensions. Prints often have a small white border, so measure both the visible image area and the full sheet. Write those numbers down before you shop for a frame.

A mat does more than fill space. It keeps the glass off the print surface, prevents condensation from touching the art, and gives the eye a rest between the image and the frame edge. As a rule, a mat border of 2 to 3 inches looks balanced for most prints, though a small print can handle 1.5 inches.

• Common mistake: buying a frame that matches the paper size exactly, leaving no room for a mat.
• Checkpoint: the mat opening should overlap the paper edge by about 1/8 inch so the print does not shift.

Step 2: Choose materials that will not damage the print

Paper is acidic over time, and so are many cheap mats and backing boards. Look for acid-free or archival mat board and a backing that is at least acid-free. If you are framing something you plan to keep for years, archival materials are worth the small extra cost.

Glass versus acrylic is the next choice. Glass is heavier and can break, but it is more scratch-resistant. Acrylic is lighter and safer for large pieces, but it scratches more easily. Either way, keep the print from touching the glazing.

• Common mistake: using cardboard as a backing. It will yellow the print over time.
• Checkpoint: the frame package should feel rigid, with no flex when you gently twist it.

Step 3: Assemble the frame in a clean, dust-free space

Work on a clean table, not the floor. Wash your hands or wear cotton gloves so oils do not transfer to the paper. Place the glazing face down, then the mat, then the print face down into the mat opening, then the backing board.

If you are using a ready-made frame, check that the print sits flat and does not bow. Bowing is a sign the frame is too tight or the backing is uneven. Close the frame and gently tap the edges to settle everything before adding the hanging hardware.

• Common mistake: pressing on the print with bare fingers to flatten it. Use the backing board instead.
• Checkpoint: hold the finished frame up to a light. You should not see dust or the print edge through the glazing.

Step 4: Hang it at eye level and away from direct light

The center of the artwork should sit around 57 to 60 inches from the floor, which is roughly eye level for most adults. In a room where people sit, such as a living room or game room, you can go slightly lower so the art is comfortable to view from a couch.

Direct sunlight fades inks faster than anything else. Hang your print on a wall that gets indirect light, or use UV-filtering glazing if the spot is bright. Avoid placing it directly above a radiator, vent, or fireplace, where heat and moisture swing quickly.

• Common mistake: hanging art too high because it feels safer. It should relate to the furniture below it.
• Checkpoint: step back and look from the main seating position. The print should feel connected to the wall, not floating.

Step 5: Consider a no-frame display for textured or lenticular pieces

Not every Dead by Daylight print needs a frame. Lenticular posters, for example, change as you move past them, and putting them behind glass can dull that effect. A clean clip, a magnetic hanger, or a shallow ledge shelf can show the piece without flattening it.

If you go frameless, keep the print out of high-traffic areas where it can be bumped, and avoid humid rooms like bathrooms. A simple ledge shelf also lets you swap prints seasonally without new hardware.

• Common mistake: using tape directly on the print. It leaves residue and can tear paper.
• Checkpoint: the print should hang flat against the wall with no curling corners.

Framing and display steps at a glance

1. Measure the print and plan the mat: Record the image and paper dimensions, then choose a mat with 2 to 3 inches of border for most prints. Checkpoint: the mat opening should overlap the paper edge slightly.
2. Pick archival materials: Use acid-free mat board and backing, and keep the print from touching the glazing. Checkpoint: the frame package should feel rigid with no flex.
3. Assemble in a clean space: Work on a table with clean hands or gloves, layering glazing, mat, print, and backing. Checkpoint: no dust or print edges visible through the glazing.
4. Hang at eye level and away from direct sun: Center the art around 57 to 60 inches from the floor and avoid heat sources. Checkpoint: view it from your main seating position before committing.
5. Go frameless for lenticular or textured pieces: Use a clip, magnetic hanger, or ledge shelf instead of glass for prints with changing effects. Checkpoint: the print hangs flat with no curling corners.

Dead by Daylight pieces that display well

• Sinister Grace Lenticular Poster: This lenticular poster is visually striking and changes as you view it from different angles. Because the effect depends on movement and light, it is a strong candidate for a frameless display or a spot with indirect light rather than behind reflective glass.
• Dead By Daylight Soundtrack (Purple alternate cover): This is a leftover copy of the long out-of-print purple variant cover of the Volume 1 soundtrack, and it ships separately from other purchases. If you are building a themed wall, plan for a separate shipment and consider displaying the record sleeve alongside your art print for a cohesive look.

Framing a Dead by Daylight print is mostly about preparation: measure twice, choose materials that will not damage the paper, and hang it where light and height work in your favor. Get those right and the print will look intentional for years.