How to Care for Your Phunny Plush Hillbilly Plush: Cleaning and Display Tips

Quick answer

Spot-clean your Phunny plush Hillbilly with a damp cloth and mild soap before it gets visibly dirty, air-dry it away from direct heat, and display it out of harsh sunlight. For deeper cleaning, hand-wash gently, squeeze—never wring—and reshape before drying. The goal is to protect the plush fibers and any attached details so the figure keeps its shape and color.

A Phunny plush Hillbilly is built to be handled, but it still collects dust, skin oils, and the occasional spill. The good news: plush maintenance is straightforward once you know which steps to avoid. This guide walks through the exact order—spot-clean, deep-clean, dry, display—with a checkpoint at each stage so you do not accidentally mat the fabric or damage attached parts.

You do not need specialty products. A mild soap, a soft cloth, and patience handle almost everything. The one thing you should never do is rush drying or use high heat, because both can shrink fibers and distort the plush's shape. Follow the steps below and your Hillbilly will stay display-ready.

Before you clean: check the plush and gather supplies

Start by looking over the entire plush. Check for loose threads, any glued-on elements, and the hangtag or label. If the plush has an attached accessory or a stiffened part, you will want to avoid soaking that area. The Phunny plush Hillbilly holds both an axe and a bell, so pay attention to where those meet the body—those joints are the most likely spots to loosen with rough handling.

Gather a soft microfiber cloth, a bowl of cool water, a drop of mild liquid soap, and a clean towel. Skip bleach, harsh detergents, and hot water. If you plan to deep-clean, also have a mesh laundry bag or a pillowcase ready. Working with everything within reach keeps you from leaving soap residue on the plush while you search for supplies.

• Checkpoint: if any part feels stiff or glued, plan to spot-clean only and avoid submerging it.

Spot-clean surface dirt and stains

For everyday dust and small marks, dampen a microfiber cloth with cool water and add a tiny drop of mild soap. Wipe the plush in the direction of the fibers, not in circles, because circular rubbing can rough up the surface. Rinse the cloth and wipe again with plain water to remove soap residue. Soap left behind attracts new dirt faster.

If you are dealing with a sticky spot, let the damp cloth sit on it for a minute before wiping. Do not scrub hard. The goal is to lift the stain, not to work it deeper into the fabric. After spot-cleaning, blot the area with a dry towel and let it air-dry completely before putting the plush back on display.

• Common mistake: using too much water. A damp cloth, not a wet one, is enough for surface cleaning.

Deep-clean by hand when spot-cleaning is not enough

If the plush is heavily soiled, hand-washing is safer than a washing machine. Fill a basin with cool water and a small amount of mild soap. Submerge the plush and gently squeeze the soapy water through the fabric. Do not twist, wring, or stretch the plush. If there are attached tools like the axe or bell, keep them above the waterline and clean them separately with a damp cloth.

After washing, rinse in cool water until no soap remains. Squeeze gently to remove excess water, then roll the plush in a clean towel and press down to absorb more moisture. Reshape the plush with your hands while it is still damp. This is the best time to fix any flattening or misalignment in the limbs.

• Checkpoint: if the water runs clear and no suds appear when you squeeze, rinsing is complete.

Dry the plush without heat or direct sun

Air-drying is the only safe method. Place the plush on a clean towel in a well-ventilated room, away from radiators, space heaters, and direct sunlight. Heat can shrink synthetic fibers and fade colors. Sunlight can also yellow white fabric over time. If you need to speed drying, point a fan at the plush on a low setting, but do not use a hair dryer.

Turn the plush occasionally so all sides dry evenly. Most plush toys dry within 12 to 24 hours depending on humidity. Do not put the plush back on a shelf until it is completely dry inside and out. A slightly damp plush can grow mildew, which is hard to remove and smells unpleasant.

• Common mistake: drying on a radiator or in a hot car. Both can warp the plush and damage attached parts.

Display and store to prevent future damage

Once dry, choose a display spot away from direct sun and heat sources. A shelf or cabinet with stable temperature and low humidity is ideal. If you keep the plush on an open shelf, dust it weekly with a dry microfiber cloth or a soft brush. This prevents dust from working into the fibers, which is what makes plush look dull over time.

For long-term storage, place the plush in a breathable cotton bag or a clean pillowcase. Avoid plastic bags, which trap moisture. Store it flat or lightly propped so it does not lose its shape. If you have other Dead by Daylight collectibles, keep the plush separate from hard items that could snag the fabric.

• Tip: rotate your display every few months so no single area gets constant light exposure.

Step-by-step plush care routine

1. Inspect and gather supplies: Check for loose parts, then set out a microfiber cloth, cool water, mild soap, and a dry towel. Checkpoint: if any part is glued or stiff, plan to spot-clean only.
2. Spot-clean surface dirt: Wipe with a damp cloth in the direction of the fibers, rinse with plain water, and blot dry. Common mistake: scrubbing in circles, which roughens the fabric.
3. Hand-wash for deep cleaning: Submerge in cool soapy water, squeeze gently, and rinse until no suds remain. Keep attached tools above water. Checkpoint: water should run clear when rinsing is complete.
4. Air-dry away from heat: Place on a towel in a ventilated room, turn occasionally, and let dry completely for 12–24 hours. Common mistake: using a hair dryer or radiator, which can warp the plush.
5. Display and store smartly: Keep out of direct sun, dust weekly, and store in a breathable bag when not on display. Next step: rotate your display every few months to prevent uneven fading.

Phunny plush details that affect care

• The Wraith Phunny plush: The Wraith Phunny plush by Kidrobot stands 7.5 inches tall and holds both of his signature tools: an axe made from the skull and spine of his former boss, and the Wailing Bell that lets him disappear. The attached axe and bell are the most delicate parts during cleaning. Keep them out of the water and support them when you reshape the plush.
• Dead by Daylight x Youtooz - Bloody Jason: Taking an impending step forward at 4.6 inches tall as his right foot cracks through a red, brown, and blue pallet, his head tilts forward as an unseen gaze emanates from the dark eyeholes of the white and red hockey mask strapped to his bare head. The painted details on this figure are not plush, so if you display it near your Phunny plush, dust it with a dry cloth only. Never use water on painted surfaces.

Cleaning a Phunny plush Hillbilly comes down to gentle handling and patience. Spot-clean often, hand-wash only when needed, and always air-dry away from heat. With these habits, your plush stays soft, colorful, and ready to show off.